Dram Timing Control - Asus B85M-E/DASH E-Manual

2.4.4 Max CPU Cache Ratio [Auto]
Allows you to set the uncore ratio of the processor to its possible maximum value.
Configuration options: [Auto] [8] ~ [80].
2.4.5 BCLK Frequency : DRAM Frequency Ratio [Auto]
Allows you to set the BCLK frequency to DRAM frequency ratio mode.
[Auto] DRAM frequency is set to the optimized settings.
[100:133] The BCLK frequency to DRAM frequency ratio is set to 100:133.
[100:100] The BCLK frequency to DRAM frequency ratio is set to 100:100.
2.4.6 Memory Frequency [Auto]
Allows you to set the memory operating frequency. Configuration options: [Auto] [DDR3‑
800MHz] [DDR3‑1066MHz] [DDR3‑1333MHz] [DDR3‑1400MHz] [DDR3‑1600MHz]
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
2.4.7 Max. CPU Graphics Ratio [Auto]
Allows you to set the CPU Graphics maximum ratio. The maximum ratio is 60x. Use <+>/<‑>
to adjust the value.
2.4.8 GPU Boost [As is]
Allows you to enable the OC Tuner to automatically overclock the frequency and voltage
settings of CPU and DRAM to enhance the system performance, and accelerate the
integrated GPU for extreme graphics performance. Configuration options: [As is] [Enabled].
2.4.9 EPU Power Saving Mode [Auto]
Allows you to enable or disable the EPU power saving function. Configuration options:
[Disabled] [Enabled] [Auto]
2.4.10

DRAM Timing Control

The subitems in this menu allow you to set the DRAM timing control features. Use the
<+> and <‑> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
Primary Timings
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [1] – [31]
ASUS B85M-E/DASH
2‑13