Asus B85M-E/DASH E-Manual page 21

Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port
Light Blue (Rear panel) Line In
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
To configure a 7.1-channel audio output:
Use a chassis with HD audio module in the front panel to support a 7.1-channel audio
output.
8. USB 2.0 ports 9 and 10. These two 4-pin Universal Serial Bus (USB) ports are for
USB 2.0/1.1 devices.
9. USB 3.0 ports 5 and 6. These two 9-pin Universal Serial Bus (USB) ports are for USB
3.0 devices.
• DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows
operating system.
• Due to USB 3.0 controller limitations, USB 3.0 devices can only be used under a
Windows
• USB 3.0 devices can only be used for data storage.
• We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance from your USB 3.0 devices.
10. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are for USB
2.0/1.1 devices.
11. DVI-D port. This port is for any DVI-D compatible device. DVI-D can't be converted to
output RGB Signal to CRT and is not compatible with DVI-I.
12. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
13. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
ASUS B85M-E/DASH
Headset
4.1-channel
2.1-channel
Rear Speaker Out Rear Speaker Out Rear Speaker Out
Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Mic In Mic In
- -
OS environment and after USB 3.0 driver installation.
®
5.1-channel
Bass/Center Bass/Center
- Side Speaker Out
7.1-channel
®
1-13