Asus B85M-E/DASH E-Manual page 69

2.7.3 Bootup NumLock State [On]
[On] Sets the power‑on state of the NumLock to [On].
[Off] Sets the power‑on state of the NumLock to [Off].
2.7.4 Wait for 'F1' If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
2.7.5 Option ROM Messages [Force BIOS]
[Force BIOS] The third‑party ROM messages will be forced to display during the boot
sequence.
[Keep Current] The third‑party ROM messages will be displayed only if the third‑party
manufacturer had set the add‑on device to do so.
2.7.6 Interrupt 19 Capture [Disabled]
[Enabled] Allows the option ROMs to trap Interrupt 19.
[Disabled] Disables this function.
2.7.7 CSM (Compatibility Support Module)
Allows you to configure the CSM (Compatibility Support Module) items to fully support the
various VGA, bootable devices and add‑on devices for better compatibility.
Launch CSM [Enabled]
[Auto] The system automatically detects the bootable devices and the add‑on
devices.
[Enabled] For better compatibility, enable the CSM to fully support the non‑UEFI
driver add‑on devices or the Windows
[Disabled] Disable the CSM to fully support the Windows
Security Boot.
The following four items appear when you set Launch CSM to [Enabled].
Boot Devices Control [UEFI and Legacy OPROM]
Allows you to select the type of devices that you want to boot up. Configuration options:
[UEFI and Legacy OPROM] [Legacy OPROM only] [UEFI only]
Boot from Network Devices [Legacy OPROM first]
Allows you to select the type of network devices that you want to launch. Configuration
options: [Legacy OPROM first] [UEFI driver first] [Ignore]
Boot from Storage Devices [Legacy OPROM first]
Allows you to select the type of storage devices that you want to launch. Configuration
options: [Both, Legacy OPROM first] [Both, UEFI first] [Legacy OPROM first] [UEFI driver
first] [Ignore]
ASUS B85M-E/DASH
UEFI mode.
®
Security Update and
®
2‑39