Asus B85M-E/DASH E-Manual page 68

USB Support [Partial Initialization]
[Disabled]
[Full Initialization]
[Partial Initialization]
PS/2 Keyboard and Mouse Support [Auto]
Select any of these settings when PS/2 keyboard and mouse are installed. These settings
only apply when Fast Boot is enabled.
[Auto]
[Full Initialization] For full system control, PS/2 devices will be available during POST at any
[Disabled]
Network Stack Driver Support [Disabled]
[Disabled]
[Enabled]
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot]
[Fast Boot]
2.7.2 Boot Logo Display [Auto]
[Auto]
[Full Screen]
[Disabled]
POST Delay Time [3 sec]
This item appears only when you set Boot Logo Display to [Auto] and [Full Screen]. This item
allows you to select the desired additional POST waiting time to easily enter the BIOS setup.
You can only execute the POST delay time during Normal Boot. The values range from 0 to
10 seconds.
This feature will only work under normal boot.
Post Report [5 sec]
This item appears only when you set Boot Logo Display to [Disabled]. This item allows you to
select a desired post report waiting time. Configuration options: [1 sec] ~ [10 sec] [Until Press
ESC].
2‑38
All USB devices will not be available until OS boot up for a
fastest POST time.
All USB devices will be available during POST. This process will
extend the POST time.
For a faster POST time, only the USB ports with keyboard and
mouse connections will be detected.
For a faster POST time, PS/2 devices will only be available when the
system boots up or rebooted when the PS/2 devices have not been
reconnected or changed. If you disconnect or change PS/2 devices before
restarting the system, PS/2 devices will not be available and BIOS setup
program will not be accessible via PS/2 devices.
circumstances. This process will extend POST time.
For the fastest POST time, all PS/2 devices will not be available until your
computer enters the operating system.
Select to skip the network stack driver from loading during POST.
Select to load the network stack driver during POST.
Returns to normal boot on the next boot after AC power loss.
Accelerates the boot speed on the next boot after AC power loss.
Adjusts logo automatically based on Windows
Maximize the boot logo size.
Hide the logo during POST.
display requrements.
®
Chapter 2: Getting started