Installing A Dimm - Asus B85M-E/DASH E-Manual

•
•
•
1.4.3

Installing a DIMM

1
2
3
1-8
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked
or at a higher frequency, refer to section 2.4 Ai Tweaker menu for manual memory
frequency adjustment.
For system stability, use a more efficient memory cooling system to support a full
memory load (4 DIMMs) or overclocking condition.
Visit the ASUS website at: www.asus.com for the latest QVL.
Chapter 1: Product introduction