Dram Timing Control - Asus STRIX X99 Manual

BCLK Frequency: DRAM Frequency Ratio [Auto]
This item allows you to set the BCLK frequency to DRAM frequency ratio.
[Auto] The BCLK frequency to DRAM frequency ratio will be set to the
optimized setting.
[100:100] The BCLK frequency to DRAM frequency ratio will be set to 100:100.
[100:133] The BCLK frequency to DRAM frequency ratio will be set to 100:133.
DRAM Frequency [Auto]
This item allows you to select the DRAM operating frequency. The configurable options vary
with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized
setting.
Configuration options: [Auto] [DDR4-800MHz] – [DDR4-4000MHz]
TPU [Keep Current Settings]
This item allows you to automatically overclock the frequency and voltage of CPU and DRAM
respectively to enhance the system performance.
[Keep Current Settings]
[TPU I] Applies air cooling overclocking conditions.
[TPU II] Applies water cooling overclocking conditions.
EPU Power Saving Mode [Disabled]
The ASUS EPU (Energy Processing Unit) sets the CPU in its minimum power consumption
settings. Enable this item to set lower CPU Input Voltage and Vcore voltages and achieve the
best energy saving condition.
Configuration options: [Disabled] [Enabled]

DRAM Timing Control

The subitems in this menu allow you to set the DRAM timing control features. Use the <+>
or <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
ASUS STRIX X99 GAMING
Keep the current settings without changing anything.
3-17