Usb Configuration - Asus B85M-E/DASH E-Manual

2.5.6 MCTP Configuration
MCTP Support [Enabled]
Allows you to enable or disable the Management Component Transport Protocol (MCTP)
support. Configuration options: [Enabled] [Disabled]
PLDM for SMBIOS [Enabled]
Allows you to enable or disable the Platform Level Data Model (PLDM) for System
Management BIOS (SMBIOS). Configuration options: [Enabled] [Disabled]
PLDM for BIOS Control and Configuration [Enabled]
Allows you to enable or disable the PLDM for BIOS control and configuration. Configuration
options: [Enabled] [Disabled]
PLDM for Platform Monitoring [Enabled]
Allows you to enable or disable the PLDM for platform monitoring. Configuration options:
[Enabled] [Disabled]
2.5.7

USB Configuration

The items in this menu allow you to change the USB‑related features.
The USB Devices item shows the auto‑detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled]
[Disabled]
[Auto]
Intel xHCI Mode [Smart Auto]
®
[Auto]
[Smart Auto]
[Enabled]
[Disabled]
EHCI Hand-off [Disabled]
[Enabled]
[Disabled]
USB Single Port Control
USB3_1/2/5/6, USB3, USB4, USB9~14 [Enabled]
Allows you to enable or disable an individual USB port. Refer to the section 1.2.3
Motherboard layout in this user manual for the locations of the USB ports.
Configuration options: [Enabled] [Disabled].
2‑28
Enables the support for USB devices on legacy operating systems (OS).
The USB devices can be used only for the BIOS setup program.
Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Keeps the last operation of xHCI controller in OS during bootup.
Enables the operation of xHCI controller.
Enables the function.
Disables the function.
Enables the support for operating systems without an EHCI hand‑off
feature.
Disables the function.
Chapter 2: Getting started