Gearshift Light Modes; Setting Gearshift Light Limits - Triumph Daytrona 675 Manual

Gearshift Light Modes

The gearshift lights have four programmable
operating modes as described below:
• 3 LED mode: The first three lights
illuminate when the set limit is
reached, and remain illuminated
until the engine speed drops below
the set limit.
• 6 LED mode: All six lights illuminate
when the set limit is reached, and
remain illuminated until the engine
speed drops below the set limit.
• OFF mode: The gearshift lights are
turned OFF.
• SE mode:
progressively illuminate in 250 rpm
increments until the set speed is
reached. At the set speed all six
lights will be illuminated.

Setting Gearshift Light Limits

The gearshift lights will not operate below
3,500 rpm to avoid the lights operating at
idle.
To change the gearshift light modes, turn the
ignition to the ON position.
Press and release button 'A' until set up is
visible in the display screen then press
button 'B'.
Press and release button 'A' until SHIFt is
visible then press button 'B'. The current
mode will be
corresponding gearshift lights will illuminate.
The lights will
displayed and the
General Information
Press and release button 'A' until the desired
gearshift light mode is visible then press
button 'B'. The display will scroll through in
the following order:
• SE (Scale mode);
• 3 (3 LED mode);
• 6 (6 LED mode);
• OFF (Gearshift lights off).
.
3
4
2
1. Gearshift lights
2. Display screen (3 mode shown)
3. Button A
4. Button B
1
31