Summary of Contents for Vent-Axia 45 90 49 (Pullcord)
Page 1
WC & BATHROOM FAN Installation and Wiring Instructions Stock Ref. N° 45 90 49 (Pullcord) 45 90 50 (Timer) 45 90 51 (Humidistat) READ INSTRUCTIONS IN CONJUNCTION WITH ILLUSTRATIONS PLEASE SAVE THESE INSTRUCTIONS...
Page 2
C. Ensure that the mains supply (Voltage, Frequency, and Phase) complies with the rating label. D. The Fan should only be used in conjunction with the appropriate Vent-Axia products. E. It is recommended that the connection to the fan connecter terminals is made with flexible cable.
INSTALLATION. PANEL MOUNTING 1. Cut a 105mm∅ hole through the panel. 2. Remove the Indoor Grille [A]. Insert a small bladed screwdriver into the slot at the base of the Grille, push the release catch in and gently lever the Grille upwards away from the Inner Cover [B]. 3.
WIRING. WARNING: THE FAN AND ANCILLARY CONTROL EQUIPMENT MUST BE ISOLATED FROM THE POWER SUPPLY DURING THE INSTALLATION / OR MAINTENANCE. NOTE: The Controller MUST be surface mounted to allow air to freely circulate around the unit. When installed in a loft void it MUST NOT be enclosed or covered with insulation. 1.
Kingdom contact your local supplier. Vent-Axia guarantees this product for five years from the date of purchase against faulty material or workmanship. In the event of any part being found to be defective, the product will be repaired, or at the Company’s discretion the product will be replaced without charge, provided that the product: Has been installed and used in accordance with the instruction given with each unit.