Removing Power From The Drive; Figure 6-3 Ejecting A Cartridge From A Full-Height Tape Drive; Figure 6-4 Ejecting A Cartridge From A Half-Height Tape Drive - Lenovo ThinkServe LTO User Manual

Chapter 6–Operating your tape drive

Removing power from the drive

52
1. Press the Eject button on the front panel.

Figure 6-3 Ejecting a cartridge from a full-height tape drive

1. Eject button

Figure 6-4 Ejecting a cartridge from a half-height tape drive

2. The drive will complete its current task, rewind the tape to the beginning,
and eject the cartridge. The rewind process may take up to 10 minutes.
The Ready light will flash to indicate that the unload is still in progress.
To ensure reliable operation, do not remove power from the drive during
read, write, fast-search, load and unload activities. Do not remove power
during a firmware upgrade.
1019491–002