Table of Contents
Advertisement
Solving operating problems
PROBLEM
POSSIBLE CAUSES
Machine is
Machine may not be level.
continually going
out of balance.
Too much water for the load
Too much or too
The machine needs to
little water when
determine the correct water
filling on auto
level for the load.
water level.
Some loads do not
suit 'Auto' water level,
eg pillows.
Machine is making
Banging.
noises.
Other noises.
Small puddle
The water level is too high
coming from
for the amount of clothes
under the
and has caused excessive
machine.
splashing.
Large bulky garments
(eg pillows duvet) can cause
splashing.
TROUBLESHOOTINg
WHAT TO DO
Check the machine is level and does
not rock in any direction. Refer to
page 9.
Ensure an appropriate water level is
selected for the load size (or select
'Auto' water level).
Refer to page 31 to change the out
of balance recovery mode.
Refer to the 'Wash options' section
for more information.
Manually select the most
appropriate water level for the load.
Load is out of balance. Press
redistribute the load.
Refer to the 'Caring for your washer'
section.
Select a lower water level. Refer to
page 22 for more information.
Wash on the 'Bulky' cycle. Refer to
page 26.
and
39
Hide quick links:
Advertisement
Table of Contents
