Fisher & Paykel FabricSmart WA1068P Installation Instructions And User Manual page 25

Hide thumbs Also See for FabricSmart WA1068P:
Table of Contents

Advertisement

Wash Temp
FabricSmart™ offers 5 wash temperatures, and an additional setting, 'Controlled Cold'.
The wash temperature selected is used in the detergent activating part of the wash
except for the 'Sports' cycle (refer to the 'Eco-Active™ wash' section). If Eco-Active™ is
'On' the temperature will be lower for the second part of the wash. When Eco-Active™
'Off' is selected, the bowl will fill with the wash temperature selected.
Note: for the 'Allergy' cycle the bowl fills with water at the temperature selected.
The temperature of cold tap water varies widely depending on your location and the
season. We have developed 'Controlled Cold', which adds a small amount of warm
water, when necessary, to raise your cold water wash to 20°C for a more effective wash
(refer to the 'Changing pre-set options' section for detail on how to set 'Controlled Cold'
as the default temperature for your cold water wash).
Soil Level
Your clothes and other washable items sometimes need more or less cleaning than
others. The 'Soil Level' option lets you adjust the wash to suit the amount of soil in your
load. For example, for dirty clothes, select 'Heavy' and for items that are only lightly
soiled, select 'Light'. This adjusts the wash time accordingly to give the load the right
amount of agitation in order to remove the soil.
Spin Speed
Your washer offers 3 spin speeds: 1100 rpm, 700 rpm and 300 rpm, plus an additional
'No Spin' option. Simply increase or decrease your spin speed by touching the 'Spin
Speed' button.
Note: some spin speeds are not available on some cycles for best clothes care
(eg 'Delicate' cycle).
Use the 'No Spin' option to:
Remove drip dry garments from a mixed load before the wash goes into 'Spin'.
Minimise the clothes creasing when they are left to sit in the bottom of the bowl at the
end of the cycle.
When you have selected 'No Spin', the cycle will end
after the rinse allowing you to remove drip dry items
before you spin the remaining items. Once drip dry
items have been removed, touch
cycle (change the spin speed if necessary, eg select
'300' for delicate or creasable items) and touch
Your washer will optimise the spin speed according
to the level of out of balance in the load.
WASH OPTIONS
, select the 'Spin'
.
Selecting the 'No Spin' option
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents