Elation POWER SPOT 700CMY User Manual page 24

Power Spot 700CMY™
The DMX address is non-destructible and will remain in the fixture's memory even
when the power has been switched off. Memory is backed-up and retained by an
internal power source with a five year shelf life.
8.2 Test Program
Test
The Test Program engages the fixture's internal test mode. This function runs a
complete test procedure of all functions. Press Enter to launch the self-test or the
Mode button to cancel and return to the main menu.
8.3 The Audio Program
AUDI
The Audio menu allows you to run a stand-alone audio program. This program can
run either fast (AFST) or slow (Aslw); Fast (AFST): When running in "fast" mode
every sound impulse will trigger a new step. (Aslw): When running in You may run
several fixtures together at once to achieve a synchronized light show running to
sound in a Master/Slave configuration. To run in a Master/Slave.
Additionally you can choose a basic position for this audio chaser. Use either the
internal manual mode or an external DMX controller to set the desired Pan/Tilt
position. Confirm this setting in the SVPT menu by pressing the Enter button.
You can also set the size of the audio chaser in the SIZE menu. You have the
choice between: NORM (no basic position has to bee chosen), 'BIG', 'MIDL' and
'SMAL').
If you want to run several units in a Master/Slave system be sure designate your
first unit in the chain as the master. All others must be "Slave" Master = OFF.
Notice: The Audio function is only working if no DMX is connected.
8.4 Lamp On/Off
LAMP
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 24