Elation POWER SPOT 700CMY User Manual page 16

Power Spot 700CMY™
periodic safety inspection of all installation material and the fixture. If you lack these
qualifications, do not attempt the installation yourself. Improper installation can result in
bodily injury.
CAUTION!
Be sure a qualified electrician performs all electrical
connections.
Be sure to complete all rigging and installation procedures before connecting the main
power cord to the appropriate wall outlet.
Clamps
The POWER SPOT 700CMY™ has been designed to hold multiple clamps to the bottom
of the unit in several different orientations. Always use an appropriately rated clamp to
mount this unit to truss. Refer to the printed instructions on the bottom of the fixture for
proper clamp installation.
a) Cam lock System: This system allows a quick and efficient means to
secure a clamp to the unit. To attach a clamp to the unit, attach a clamp
that is rated to handle the weight of the unit to your cam lock. After a
clamp has been attached to the cam lock, attach the cam locks to the
designated position on the bottom of your unit. Lock the cam locks into
position by turning the wing nuts 90°.
b) Be sure to always use two cam locks mounted to the bottom of unit to
ensure safe truss mounting (each two opposite threads max. M10x20).
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com
90°
- Page 16