Troubleshooting - Storz & Bickel GMBH Mighty Instructions For Use Manual

Possible faults

Troubleshooting

Problem
MIGHTY cannot be
switched on.
The display of the MIGHTY
shows: ERR 001.
The display of the MIGHTY
shows: ERR 002.
The display of the MIGHTY
shows: ERR 003.
The display of the MIGHTY
shows: ERR 004.
If the preceding tips do not
yield the desired results, or for
any other defects or problems
not mentioned here, please unplug the
power adapter and contact our Ser-
vice Center immediately.
Do not open the vaporizer or
the power adapter! Without
special tools and specialized
knowledge, any attempt to open either
of these devices will cause damage to
them. Such an attempt will invalidate
the warranty claim.
6 . T H E M I G H T Y VA P O R I Z E R
Possible cause/remedy
Please ensure that the MIGHTY's battery is charged or
the vaporizer is connected via the power adapter to a
functioning mains socket.
If the vaporizer still does not work, then the device is
faulty. In this case, disconnect from the mains without
delay and get in touch immediately with our Service
Center.
Battery temperature is too high. Allow the vaporizer to
cool down.
Battery temperature is too low. Warm up the vaporizer.
The power adapter is not suitable. Please use an original
Storz & Bickel power adapter or 12 volt car adapter.
The vaporizer is faulty. In this case, disconnect from the
mains without delay and get in touch immediately with
our Service Center.
Do not try to remedy the defect your-
self. Contact our Service Center di-
rectly.
Disposal
If the vaporizer or the power adapter
is irreparably damaged, please do not
simply throw them away. As they are
made of high quality, completely recy-
clable component parts, they should
be brought to a material recycling
center in your town or sent to our Ser-
vice Center for disposal.
14