Replacing The Touchpad; Procedure; Post-Requisites - Dell Alienware 13 Service Manual

Replacing the Touchpad

WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After Working Inside Your
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Procedure

1
Align the screw holes on the touchpad with the screw holes on the palm-
rest assembly.
2
Replace the screws that secure the touchpad to the palm-rest assembly.
3 Slide the touchpad cable into the touchpad connector and press down the
latch to secure the cable.

Post-requisites

1 Follow the procedure from step 5 to step 9 in "Replacing the
2
Follow the procedure from step 3 to step 7 in "Replacing the
drive" .
3
Replace the base
42
Before Working Inside Your
panel.
Computer. For more safety best
Computer.
palm rest".
solid-state