Replacing The Status-Light Board; Procedure; Post-Requisites - Dell Alienware 13 Service Manual

Replacing the Status-Light
Board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After Working Inside Your
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Procedure

1
Slide the status-light board cable into the status-light board connector
and press down the latch to secure the cable.
2
Align the screw hole on the status-light board with the screw hole on the
palm-rest assembly.
3
Replace the screw that secures the status-light board to the palm-rest
assembly.

Post-requisites

1
Follow the procedure from step 3 to step 4 in "Replacing the keyboard".
2 Follow the procedure from step 5 to step 9 in "Replacing the
3
Follow the procedure from step 3 to step 7 in "Replacing the
drive" .
4
Replace the base
Before Working Inside Your
panel.
Computer. For more safety best
Computer.
palm rest".
solid-state
55