Dell Alienware 13 Service Manual page 113

Advanced
Intel(R) SpeedStep Technology
Virtualization
Integrated NIC
USB Emulation
USB PowerShare
USB Wake Support
Allows you to enable or disable Intel
(R) Speedstep Technology.
NOTE: If enabled, the processor
clock speed and core voltage are
adjusted dynamically based on
the processor load.
Default: Enabled
Allows you to enable or disable the
Intel Virtualization technology.
Default: Enabled
Allows you to enable or disable the
on-board LAN controller. Default:
Enabled
Allows you to enable or disable the
USB emulation feature. This feature
defines how the BIOS, in the absence
of a USB-aware operating system,
handles USB devices. USB emulation
is always enabled during POST.
NOTE: You cannot boot any type
of USB device (floppy, hard drive,
or memory key) when this
option is off.
Default: Enabled
Allows you to charge USB devices
when the computer is turned off or in
standby mode. Default: Enabled
Allows you to enable USB devices to
wake the computer from standby or
to disable the USB wake support
feature.
NOTE: If USB PowerShare is
enabled, a device connected to
the USB PowerShare connector
may not wake the computer.
Default: Disabled
113