Installing the display back-cover
About this task
Place the display back-cover on a clean and flat surface.
Next steps
1. Install the
display cable
2. Install the
camera
3. Install the
display hinge
4. Install the
display panel
5. Install the
display bezel
6. Install the
display assembly
7. Install the
hard drive assembly
8. Install the
WLAN
9. Install the
battery
10. Install the
base cover
11. Install the
SD card
12. Follow the procedure in
Palm-rest and keyboard assembly
Removing the palmrest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD card
86
Disassembly and reassembly
after working inside your computer
before working inside your computer