Palm-Rest And Keyboard Assembly; Removing The Palmrest And Keyboard Assembly - Dell Vostro 14 3435 Owner's Manual

Palm-rest and keyboard assembly

Removing the palmrest and keyboard assembly

CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
4. Remove the 3-cell battery
5. Remove the memory modules.
6. Remove the M.2 2230 solid state drive
7. Remove the wireless card.
8. Remove the fan.
9. Remove the UMA heat sink
10. Remove the I/O board
11. Remove the I/O board.
12. Remove the speakers.
13. Remove the touchpad.
14. Remove the plastic display assembly
15. Remove the power-adapter
16. Remove the power button.
17. Remove the system board.
NOTE: The system board can be removed along with the heat sink.
About this task
The following image indicates the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
Before working inside your
or 4-cell battery (whichever applicable).
or M.2 2280 solid state drive
or discrete heat sink
FFC.
or aluminum display assembly
port.
computer.
(whichever applicable).
(whichever applicable).
(whichever applicable).
Removing and installing Field Replaceable Units (FRUs) 137