Table of Contents
Advertisement
Palm-rest and keyboard assembly
Removing the palmrest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the WLAN.
6. Remove the
memory
7. Remove the
display
assembly.
8. Remove the SSD.
9. Remove the
hard drive
10. Remove the speakers.
11. Remove the
coin-cell
12. Remove the
system
fan.
13. Remove the heatsink.
NOTE:
The system board can be removed along with the heat sink.
14. Remove the
IO
board.
15. Remove the touchpad.
16. Remove the
power adapter
17. Remove the
system
board.
About this task
NOTE:
The system board can be removed and installed together with the heatsink still attached.
After performing the preceding steps, you are left with the palmrest and keyboard assembly.
Palmrest for systems with Realtek Audio:
Palmrest for systems with Cirrus Logic audio:
80
Disassembly and reassembly
before working inside your
assembly.
battery.
port.
computer.
Advertisement
Table of Contents
