General Information - MULTIQUIP ga2.5Hr Operation And Parts Manual

FAmiliARizATiON
generator
The Multiquip GA2.5HR generator is designed as a portable
dual purpose power source for 60 Hz (single phase) lighting
facilities, power tools, submersible pumps and other
industrial and construction machinery.
The generator is mounted on rubber vibration isolators
that have a steel base backplate which is attached to the
protective steel pipe carrying frame.
The protective carrying frame is made of steel tubing and
fully wraps around the generator to protect against damage.
Reference Figure 4 and Figure 5 for the basic controls and
indicators for the GA2.5HR generator.
These portable generator are supplied with a electrical
control box (panel). To reduce vibration caused by the
engine, the control box is also placed on rubber isolators.
Control panel
The control panel is provided with the following:
„ 120V Twist-Lock Output Receptacle (L5-20R)
„ 120 VAC GFCI Receptacle (5-20R)
„ 20 Amp Main Circuit Breaker.
„ AC Voltmeter
„ Hour Meter
pAgE 18 — ga2.5HR 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (12/15/14)

GENERAl INFORMATION

dANgER
Before connecting this generator to any building's
electrical system, a licensed electrician must install an
isolation (transfer) switch.
Serious injury or death may result without this transfer
switch.