Receiver Installation; Steering & Trigger Tension Adjustment; Steering Wheel Position Adjustment; Trigger Angle Adjustment - GRAUPNER X-4S HoTT SJ Operating Instructions Manual

◎ Receiver installation

1. Install your receiver on the flat sur
face to avoid any oscillation.
2. Be aware you should keep your
antenna at least 10mm away from any
power wires to prevent interference.
3. Be sure not to cut off any antenna
wire, as it will shorten your operating
range.
◎ Steering and trigger tension adjustment
You may adjust steering wheel tension, using + driver.
You may adjust trigger ten-
sion, using + driver

◎ Steering wheel position adjustment

You may adjust
steering wheel angle
as you want.
◎ Throttle Trigger Adjustment
Loosen the bolts a
little and adjust the
throttle trigger as
you want.
Internal Structure of
Steering Cap
The angle could be adjusted if you
detach the cap and loosen the bolts
approx. 5mm.
After you adjust the angle as you
want, attach it and tighten the
bolts again.
8