Rescheduling Events; Adding Address Book Information To An Event; Setting The Alarm; Setting An Alarm For An Event - Meazura MEZ1000 User Manual

repeating event.
· If you change the date of an occurrence of a repeating event (e.g., from January 14 to January 15)
and apply the change to all occurrences, the new date becomes the start date of the repeating
event. Your RDA adjusts the end date to maintain the duration of the event.
· If you change other repeat settings (for example, time, alarm, private) of a repeating event and
apply the change to all occurrences, your RDA creates a new event. The start date of this new
event is the day on which the setting is changed. Past occurrences (prior to the day of the change)
are not changed.
· If you apply a change to a single occurrence of a repeating event (e.g., time), that occurrence no
longer shows the Repeat icon.

Rescheduling events

You can reschedule events using the Details option in the Date Book. You can also use the Details
option to convert untimed events into timed events.
To reschedule an event:
· Tap the event you want to reschedule.
· Tap Details.
· To change the time, tap the Time box, select a new time, and then tap OK.
· To change the date, tap the Date box, select a new date, and then tap OK.

Adding Address Book information to an event

You can add a name, address, and telephone number to an event using the Phone Lookup option. For
instructions, see "Using Phone

Setting the alarm

The Alarm setting lets you set an audible alarm for events in your Date Book, and display a reminder
message on-screen. For untimed events, only the reminder message appears.

Setting an alarm for an event

You can set an alarm for minutes, hours, or days before an event. When you set an alarm, an Alarm
icon appears to the far right of the event with the alarm.
You can also set a silent alarm for untimed events that displays a reminder message on-screen before
the day of the event. The alarm triggers at the specified period of minutes, hours, or days before
midnight of the day on which the untimed event begins.
For example, you set a 5-minute alarm for an untimed event that occurs on February 4. The reminder
message will appear at 11:55 p.m. on the night of February 3. The reminder remains onscreen until
you turn on your RDA and tap OK to turn off the reminder.
1. Tap the event to which you want to assign an alarm.
2. Tap Details.
3. Tap the Alarm check box to select it.
4. The default setting, 5 Minutes, appears.
5. Set the alarm time:
· Select the 5 next to the Alarm check box and enter any number from 0 to 99 (inclusive) as
the number of time units.
· Tap the pick list to change the time unit; select Minutes, Hours, or Days.
Lookup" in chapter 8, "Performing Common Tasks".
53