Other Components; Connecting The Cradle - Meazura MEZ1000 User Manual

refer to the user's manual supplied with the desktop computer.
An additional connection is made from the back of the cradle or cable's serial or USB (COM) port
connector to the AC adapter which plugs into any AC outlet.
· Stylus
Your RDA comes with two styli (one replacement). Using only the stylus on your touch-sensitive
screen will protect your screen against scratching.

Other components

Module Fasteners
Top View
Infrared Port
· Infrared Port
Uses infrared technology to transmit and receive data to and from other Meazura™ MEZ1000
RDA's, and to perform HotSync operations. See
HotSync operations" in chapter 11 for more information.
· Module Fasteners

Connecting the cradle

The cable or cradle that comes with your Meazura™ MEZ1000 RDA enables you to synchronize the
information on your Meazura™ MEZ1000 RDA with the Palm Desktop using HotSync® technology.
To connect your cable or cradle on a PC-compatible computer:
Turn off your computer and plug the USB or serial plug from the Meazura™ MEZ1000 RDA cable or
cradle into the serial (COM) port or USB port on your desktop computer.
Serial Connection
NOTE
Your Meazura™ MEZ1000 RDA requires a dedicated port. It cannot share a port with an internal
modem or other device. If you are unsure about the exact location of the serial port on your
desktop computer, refer to the manual supplied with the desktop computer.
"Beaming
USB Connection
Information" in chapter 10, and "IR
15