Inserting The Bobbin - ELNA eXcellence 760 Instruction Manual

z
x
c
v
e
b
q
w
r

Inserting the bobbin

z Place the bobbin in the bobbin holder with the thread
running off counterclockwise.
CAUTION:
Always make sure to press the lockout key to lockout
the machine or turn the power switch off before
threading the machine.
x Guide the thread into the front notch on the bobbin
holder.
q Front notch
c Draw the thread to the left, sliding it between the
tension spring blades.
w Tension spring blades
v Continue to draw the thread lightly until the thread
slips into the side notch.
e Side notch
b Pull out about 10 cm (4˝) of thread to the rear.
Reattach the hook cover plate.
r Hook cover plate
NOTE:
The threading chart is shown on the hook cover plate
for your reference.
21