GE Digital Energy LP 33 Operating Manual page 25

g
Included in the delivery you can find the following parts:
• An accessories bag.
• Control Bus cables (only for RPA system).
• 2 bolts to support the UPS cabinet (see Fig. 4.6-2).
• CD-ROM connectivity.
Bolts to block and support the LP 33
Fig. 4.6-2 Bolts to block the LP 33 on it's position
NOTE !
The wheels are designed only for limited movements on the installation
site.
NOTE !
A damaged UPS must never be installed or connected to mains or battery!
In case of any damage sustained during the transport, immediately inform the
shipping agent!
A detailed report of the damage is necessary for any indemnity claim.
Packing material recycling
GE, in compliance with environment protection, use only environmentally
friendly material.
UPS packing materials must be recycled in compliance with all applicable
regulations.
OPM_LPS_33E_10K_30K_4CN_V010.doc
Make use of the 2 bolts, as shown in the
picture, in case you desire to block the
UPS on it's position.
The bolts can be used either on the front
or the rear of the UPS.
The height can be adjusted with the 2
enclosed nuts "A", taking care however,
that the weight of the UPS remains on the
wheels.
The UPS can also be screwed directly to
the floor on each leg.
Operating Manual LP 33 / 10-20-30 kVA
25/82
GE