Maintenance And Cleaning; Cleaning And Care; Reverse The Bulb; Repairs - BOMANN KS 163 User Manual

MAINTENANCE AND CLEANING

Cleaning and care

For hygienic reasons, clean the interior and accessory parts regularly.
WARNING
Always disconnect the plug or turn off/ unscrew the fuse before cleaning. Pull the plug
and not the cable.
WARNING
Do not use steam cleaners for cleaning the device; moisture could enter electrical com-
ponents. Risk of electric shock! Hot steam could damage the plastic parts. The device
must be dry before restarting operation.
IMPORTANT
Essential oils and organic solvents, such as the juice of lemon or orange skin, butanoic
acid or cleaning agents containing acetic acid can damage plastic parts. Prevent con-
tact of any part with such substances. Do not use abrasive cleaning agents.
• Remove all food and keep covered at a cool location.
• Use warm water and a mild detergent for cleaning the interior (including rear side and bottom).
• Check the discharge opening.
• After thorough drying, restart operation.
• Clean the condenser - metal grid on the rear side (if existing) once a year, using a soft brush or
vacuum cleaner.
WARNING
Do not bend the cooling coils.
Do not use arenaceous abrasives.

Reverse the bulb

Lamp specifications: 220-240V, max. 15W
To turn off the device, set the temperature control to setting 0 - OFF.
Disconnect the plug or turn off the fuse!
• Remove the screw from the lamp cover.
• Press on the lamp cover and remove to the back.
• Replace defect illuminant.
• Reattach the lamp cover and fasten the screw.
• Reconnect the device and turn on.

Repairs

WARNING
Servicing of electric devices must be conducted by qualified experts only. Incorrect or
improper repairs constitute a risk for the user and will void the warranty!
What if . . . Troubleshooting
The design of the device ensures a trouble-free operation as well as a long life cycle. Nevertheless, if
any defect occurs during operation, please check if it is caused by improper operation.
The following problems can be solved by you by checking for the possible cause.
PROBLEM POSSIBLE CAUSE
The device is Is the plug securely connected to the
not cooling mains? Has the safety mechanism of the
properly or at wall socket been triggered?
all Is the temperature control properly set?
Is the place unqualified?
Do food items prevent the door from closing
properly?
Is the ventilation of the device hedged?
SOLUTION
Connect the plug properly to the socket,
turn on the fuse, and contact a technician if
necessary.
Check the settings.
Check the ambient temperature.
Arrange the food properly.
Clear the ventilation slits, install the device
freely
11
07/2010