Adjusting The Flash Output - Canon PowerShot S110 User Manual

•
<D>: Manual
• Calculation of standard exposure is based on the speciied metering method
(= 1 68).
• You can customize camera operation so that turning the <y> ring adjusts the
shutter speed and turning the <7> dial adjusts the aperture value (= 2 06).

Adjusting the Flash Output

Choose from the three lash levels in <D> mode.
• You can also set the lash level by choosing [ X ] in the FUNC. menu
(= 8 9), or by accessing <n> (= 9 1) and choosing [Flash Output]
in [Flash Settings] on the [4] tab.
•
You can set the lash level in <M> or <B> mode by accessing <n>
(= 9 1), choosing [Flash Settings] on the [4] tab, and then setting [Flash
Mode] to [Manual].
• You can also access the [Flash Settings] <n> screen by pressing the
<r> button and then the <n> button.
• You can also access the [Flash Settings] <n> screen by pressing the
<r> button and touching [
Speciic Shutter Speeds and Aperture Values (<M> Mode)
Enter <D> mode.
1
z z
Set the mode dial to <D>.
Conigure the setting.
2
z z
Press the <r> button and immediately
turn the <y> ring to choose the lash
level, and then press the <m> button.
X X
Once the setting is complete, [ X ] is
displayed.
].
Still Images
205