Speciic Shutter Speeds and Aperture
Values (<M> Mode)
Follow these steps before shooting to set your preferred shutter speed and
aperture value to obtain the desired exposure.
For details on available shutter speeds and aperture values, see
"Speciications" (= 3 33).
Aperture Value
Shutter Speed
Standard
Exposure Level
Exposure Level
Mark
Exposure Level
Indicator
•
After you set the shutter speed or aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
•
Screen brightness may change depending on your speciied
shutter speed or aperture value. However, screen brightness
remains the same when the lash mode is set to [h].
•
To have both the shutter speed and aperture value automatically
adjusted to obtain standard exposure, hold the shutter button
halfway and press the <o> button. Note that standard exposure
may not be possible with some settings.
•
With shutter speeds of 1.3 seconds or slower, ISO speed is [
and cannot be changed.
204
Enter <D> mode.
1
z
z
Set the mode dial to <D>.
Conigure the setting.
2
z
z
Turn the <7> dial to set the shutter
speed, and turn the <y> ring to set the
aperture value.
X
X
An exposure level mark based on your
speciied value is shown on the exposure
level indicator for comparison to the
standard exposure level.
X
X
The exposure level mark is shown
in orange when the difference from
standard exposure exceeds 2 stops. "–2"
or "+2" is displayed in orange in the lower
right when you press the shutter button
halfway.
Still Images
]