Registering Functions to the Control Ring
You can register which functions will be assigned to the control ring for each
Shooting mode.
Adjusting the Flash Output
In D mode, you can choose 3 levels of flash output.
Choose
.
Follow Step 1 on p. 121 to choose
then press the n button.
Choose a setting.
Press the qr buttons or turn the 7 dial to
choose a Shooting mode to set.
Press the op buttons or turn the y ring to
choose a function to register to the control
ring.
The function assigned to the control dial
will be changed.
Press the n button to complete the
setting and restore the shooting screen.
Set the mode dial to D.
Choose the flash output level.
After pressing the r button, immediately
turn the y ring to choose the flash output
level, then press the m button.
Once set, X will appear on the screen.
Adjusting the Flash Output
,
123