Canon PowerShot S110 User Manual page 266

Adjusting Basic Camera Functions
Start-up Screen
Customize the start-up screen shown after you turn the camera on as
follows.
Customizing the Start-up Screen
• The previous start-up setting is overwritten when you assign a new
start-up image.
266
z z
Choose [Start-up Image], and then press
the <m> button.
z z
Press the <q><r> buttons or turn the
<7> dial to choose an option.
No start-up image
Preset image
1, 2
(cannot be modiied)
Preset image
Assign a desired shot, or use the
3
included software to change the image.
Access the [Start-up Image]
1
screen in Playback mode.
z z
Press the <1> button.
z z
Following the previous procedure, choose
[3] and press the <m> button.
Choose one of your shots.
2
z z
Choose an image and press the <m>
button. After [Register?] is displayed,
choose [OK] (either press the <q><r>
buttons or turn the <7> dial), and then
press the <m> button.