Canon PowerShot S110 Getting Started

CDP-E491-010
English

Getting Started

•
Before use, be sure to read this guide.
•
Reading this guide will help you learn to use the camera properly.
•
Store this guide safely so that you can use it in the future.
Package Contents
Before use, make sure the following items are included in the
package. If anything is missing, contact your camera dealer.
Camera Battery Pack NB-5L (with terminal cover)
Battery Charger CB-2LX/CB-2LXE*
Wrist Strap WS-DC11 Interface Cable IFC-400PCU
DIGITAL CAMERA Solution Disk Getting Started (this guide)
* Power cord also included.
PDF Manuals and Camera Software
Install PDF manuals and software from the included DIGITAL
CAMERA Solution Disk. Note that Adobe Reader is required to view
the PDF manuals.
•
Insert the included DIGITAL CAMERA Solution Disk in the
computer's CD-ROM drive and follow the installation instructions.
•
After installation, you can access the Camera User Guide by
double-clicking the desktop shortcut icon.
•
For instructions on using the wireless LAN function, refer to the
Camera User Guide .
•
For software instructions, refer to the Camera User Guide or the
ImageBrowser EX Help .
Compatible Memory Cards
The following memory cards (sold separately) can be used,
regardless of capacity.
• SD memory cards* • SDXC memory cards*
• SDHC memory cards* • Eye-Fi cards
* C onforms to SD specifications. However, not all memory cards have been
verified to work with the camera.
About Eye-Fi Cards
This product is not guaranteed to support Eye-Fi card functions
(including wireless transfer). In case of an issue with an Eye-Fi card,
please check with the card manufacturer. Also note that an approval
is required to use Eye-Fi cards in many countries or regions. Without
approval, use of the card is not permitted. If it is unclear whether the
card has been approved for use in the area, please check with the
card manufacturer.
Charging the Battery
Remove the battery cover and insert the
battery in the charger.
After aligning the marks on the battery and charger, insert
z o
the battery by pushing it in ( ) and down ( ).
Charge the battery.
Battery chargers with a plug:
z
Flip out the plug and plug the charger into a power outlet. The
lamp turns orange.
z Battery chargers with a power cord:
Connect the power cord to the battery charger, and then plug
the other end into a power outlet.
When charging is finished, the lamp turns green. Remove the
z
battery.
Inserting the Battery and Memory Card
Open the cover.
z Slide the cover ( ) and open it ( ).
Insert the battery.
z Holding the battery with the terminals ( ) facing as shown,
move the battery lock in the direction of the arrow, insert the
battery, and push it in all the way until the lock clicks shut.
To remove the battery, press the battery lock in the direction of
z
the arrow.
Check the card's write-protect tab and
insert the memory card.
Shooting is not possible with cards that have a write-protect tab
z
( ) in the locked position. Slide the tab up until it clicks into the
unlocked position.
Insert the memory card with the terminals ( ) facing as shown
z
until the lock clicks shut.
z To remove the memory card, push it in until you feel a click, and
then slowly release it.
Close the cover.
Lower the cover ( ) and hold it down as you slide it, until it
z
clicks into the closed position ( ).
© CANON INC. 2012
1
1
2
2
3-1
3-2
4-1
4-2
3-1
3-2
4-3
4-1
4-2
4-4
4-3
4-4
Setting the Date and Time
Turn the camera on.
Press the power button to turn the camera on. The [Date/Time]
z
screen is displayed.
Set the date and time.
Press the < >< > buttons to choose an option, and then adjust
z q r
the setting, either by pressing the <
the < > dial.
7
z When finished, press the <
Specify your home time zone.
z Press the < q >< r > buttons or turn the <
home time zone.
Press the < m > button when finished. After a confirmation
z
message, the setting screen is no longer displayed.
Change the date and time.
1 Press the < > button.
n
2 Move the zoom lever to choose the [
3 Press the < >< > buttons or turn the <
o p
Time], and then press the <
4 F ollow step 5-2 to configure the setting, and then press the <
button.
Display Language
Enter Playback mode.
Press the < > button.
z 1
Access the setting screen.
CB-2LX
Press and hold the < m
z
the < n > button.
Press the < >< >< ><
z o p q
choose a language, and then press the <
Shooting
CB-2LXE
Turn the camera on and enter <
mode.
Press the power button and set the mode dial to <
z
Compose the shot.
To zoom in and enlarge the subject, move the zoom lever
z
toward < > (telephoto) as you watch the screen, and to zoom
i
away from the subject, move it toward <
Shoot still images.
z Press the shutter button lightly ( ).
The camera beeps twice after focusing, and AF frames are
z
displayed to indicate image areas in focus. Press the shutter
button all the way down ( ).
Shoot movies.
Press the movie button to start shooting, and press it again to
z
stop.
Viewing
Enter Playback mode.
Press the < > button.
z 1
Browse through your images.
z To view the previous or next image, press the <
or turn the < 7 > dial.
Movies are identified by a [
z
step 8-3.
Play movies.
Press the < m > button to access the movie control panel,
z
choose [ ] (either press the <
dial), and then press the <
z Movie playback begins, and you can adjust the volume as
needed by pressing the <
After the movie is finished, [
z
Touch-Screen Operations
The camera's touch-screen panel enables intuitive operation
z
simply by touching or tapping the screen.
Touch ......... Touch the screen briefly with your finger.
z
Ex: Touch [ ] to start movie playback.
z Drag ..... Touch the screen and move your finger across it.
Ex: In playback mode, drag right to left (or left to right) to choose
an image to view.
To adjust the volume during movie playback, quickly drag
up or down across the screen.
Erase the images.
1 Press the < > button.
a
2 After [Erase?] is displayed, press the <
< > dial to choose [Erase], and then press the <
7
Using wireless LAN function
For instructions on using the wireless LAN function, refer to the
z
Camera User Guide in the CD-ROM.
5-1
5-2
>< > buttons or turning
o p
m > button.
5-3
7 > dial to choose your
] tab.
3
> dial to choose [Date/
7
m > button.
n >
6-1
6-2
> button, and then immediately press
> buttons or turn the < > dial to
r 7
> button.
m
> 7-1
A
>.
A
7-2
> (wide angle).
j
7-3
7-4
8-1
8-2
q >< r > buttons
] icon. To play movies, go to
8-3
>< > buttons or turn the < >
q r 7
> button again.
m
o >< p > buttons.
] is displayed.
>< > buttons or turn the
q r
> button.
m
5-1
5-2
5-3
6-1
6-2
7-1
7-2
7-3
7-4
8-1
8-2
8-3