Wireless Lan - Canon PowerShot S110 User Manual

Troubleshooting
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
• Press the <1> button to enter Playback mode. Hold the <n> button down as
you press the <o> and <m> buttons at the same time. On the next screen, press
the <q><r> buttons to choose [B], and then press the <m> button.
Eye-Fi Cards
Cannot transfer images (= 3 00).

Wireless LAN

Cannot access the wireless LAN menu by pressing <o>.
• You cannot access the wireless LAN menu from a shooting mode. Switch to Playback
mode and try again.
•
Note that in Playback mode, the wireless LAN menu cannot be displayed during
detailed information display, magniied display, or index display. Switch to single-
image display and a viewing mode other than detailed information display. Similarly,
the wireless LAN menu cannot be accessed during iltered image display according to
speciied conditions. Cancel the playback state of the image in image search mode.
•
The wireless LAN menu cannot be displayed while the camera is connected to a
printer or computer via a cable. Disconnect the cable.
Cannot add a device/destination.
• A total of 20 items of connection information can be added to the camera. Erase
unneeded connection information from the camera irst, and then add new devices/
destinations (= 7 8).
• E-mail is the only web service for which multiple accounts can be set. Use
CameraWindow to change the desired Web service accounts (= 4 6).
• To add a smartphone as a device, irst install the dedicated application
CameraWindow on your smartphone.
• To add a computer as a device, irst install the included software CameraWindow on
the computer. Also check the environment and settings of your computer and wireless
LAN (= 5 6, 59).
• Avoid using the camera's wireless LAN function around microwave ovens, Bluetooth
devices, and other devices that operate on the 2.4 GHz band, as this will weaken
wireless LAN signals.
• Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
308