Canon PowerShot S110 User Manual page 171

Auto Exposure Bracketing (AEB Mode)
Three consecutive images are captured at different exposure levels
(standard exposure, underexposure, and then overexposure) each time
you shoot. You can adjust the amount of underexposure and overexposure
(relative to standard exposure) from –2 to +2 stops in 1/3-stop increments.
• AEB is only available in [!] mode (= 1 11).
• Continuous shooting (= 1 79) is not available in this mode.
• If exposure compensation is already in use (= 1 66), the value speciied for
that function is treated as the standard exposure level for this function.
• You can also access the setting screen of step 2 by pressing the <n>
button when the exposure compensation screen (= 1 66) is displayed.
•
Three shots are taken, regardless of any quantity speciied in [$] (= 1 08).
• In [Blink Detection] mode (= 131), this function is only available for the
inal shot.
• To access the setting screen in step 2, you can either touch [
in step 1 or touch [
• You can also conigure this setting by touching or dragging the bar on the
setting screen in step 2 to specify a value and then touching [
Image Brightness (Exposure Compensation)
Choose [ ].
1
z z
Press the <m> button, choose
[ ] in the menu, and then choose [
(= 8 9).
Conigure the setting.
2
z z
Press the <n> button, and then
adjust the setting by pressing the
<q><r> buttons or turning the <7> dial.
] on the exposure compensation screen (= 1 66).
Still Images
]
] on the screen
].
171