Adjusting The Flash Output - Canon PowerShot SX740 HS Camera User Manual

● : Manual
● Calculation of standard exposure is based on the specified
metering method ( = 52).
● When the ISO speed is fixed, you can compare your specified
value (indicated by the position where the exposure level mark
moves) to the standard exposure level by pressing the shutter
button halfway. The exposure level mark is shown as [ ] or [ ]
when the difference from standard exposure exceeds 3 stops.
● After you set the shutter speed and aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
● When the ISO speed is fixed, screen brightness may change
depending on your specified shutter speed and aperture value.
However, screen brightness remains the same when the flash is
up and the mode is set to [ ].
● Exposure may not be as expected when the ISO speed is set to
[AUTO], because the ISO speed is adjusted to ensure standard
exposure relative to your specified shutter speed and aperture
value.
● Image brightness may be affected by Auto Lighting Optimizer. To
keep the Auto Lighting Optimizer disabled in
mark to [Disable during man expo] on the Auto Lighting Optimizer
setting screen.
● To adjust exposure when ISO speed is set to [AUTO], select a
level on the exposure compensation bar.

Adjusting the Flash Output

Choose from the three flash levels in
mode, add a [ ]
Still Images Movies
/ / modes.
1
Enter / / mode.
2
Configure the setting.
● Choose [ ] menu ( = 23) > [Flash
settings] > [Flash mode] > [Manual] and
configure [Flash output].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback
Wireless Features
Setting Menu
Accessories
Appendix
Index
66