Ribbon - Toshiba B-EX4 SERIES Product Description

2. SUPPLY SPECIFICATIONS

2.2 RIBBON

No.
1 Shape
2 Width
3 Max. length
4 Max. OD
5 Back treatment
6 Core
7 Leader tape
8 End tape
9 Winding method
Method: Print head lifting mechanism using a solenoid
Function:
a) Non-stop ribbon save (The function is selectable in the printer system mode).
When a non-print area is detected while the printer is feeding or printing the media, this module raises
the print head to save the ribbon without stopping the media feed.
Note: Max. ribbon save amount is 50%.
b) Rotary cutter
When using the rotary cutter, the ribbon save function is required to be enabled.
Min. non-print area required to enable the ribbon save function
4", 203-dpi model
Print speed 3ips
Min. non-print
area 20mm
4", 305-dpi model
Print speed 3ips
Min. non-print
area 20mm
NOTE: When purchasing ribbon locally, they must meet the above size. There may be TOSHIBA TEC-
approved ribbons which do not fall within the above size, however, they have no functional problem.
Item
Spool type
B-EX4T 40 to 112 mm
600 m
ø 90 mm
Coated
Material Cardboard
Shape See the following figures.
Polyester film (Opaque), 300 ± 5 mm long
Polyester film (Opaque), 250 ± 5 mm long
The ink side faces outside of ribbon winding
6ips 10ips
20mm 35mm
5ips 8ips
20mm 25mm
Specification
12ips 14ips
60mm 75mm
10ips 12ips
35mm 60mm
2- 8
2.2 RIBBON
14ips
75mm
EO10-33024