2. SUPPLY SPECIFICATIONS
Maximum printable length for on
the fly issue
(1) Rotary cutter does not support 10 ips or more print speed.
(2) The head position may needed to adjust when paper thickness is over 200µ .
(*1) In case of cut issue by using rotary cutter, label length of 3 ips is below.
Label length >/= 91.0mm – (Gap width/2)
(*2) In case of cut issue by using rotary cutter, label length of 5 ips is below.
Label length >/= 99.0mm – (Gap width/2)
(*3) In case of cut issue by using rotary cutter, label length of 6 ips is below.
Label length >/= 103.0mm – (Gap width/2)
(*4) In case of cut issue by using rotary cutter, label length of 8 ips is below.
Label length >/= 110.0mm – (Gap width/2)
(*5) In case of cut issue by using disk cutter, label length is below.
Label length >/= 18.0mm – (Gap width/2)
749.0
2- 7
EO10-33024
2.1 MEDIA
749.0