Ribbon Saving Module: B-Ex904-R-Qm-R - Toshiba B-EX4 SERIES Product Description

3. OPTIONAL KIT

3.3 RIBBON SAVING MODULE: B-EX904-R-QM-R

By moving the print head up and down with a solenoid, the ribbon saving module saves loss of the
ribbon as far as possible. It is small enough to be put into the print block.
Reference (Components of the current
model)
a) Non-stop ribbon save
(The function is selectable in the printer system mode.)
When a non-print area is detected while the printer is feeding or printing the media, this module raises
the print head to save the ribbon without stopping the media feed.
Note: Max. ribbon save amount is 50%.
b) Rotary cutter
When using the rotary cutter, the ribbon save function is required to be enabled.
Min. non-print area required to enable the ribbon save function
4", 203-dpi model
Print speed 3ips
Min. non-print
area 20mm
6ips 10ips
20mm 35mm
3.3 RIBBON SAVING MODULE: B-EX904-R-QM-R
1. Solenoid
2. Harness (Connected to the Main PC board)
3. Relay PC board (with harness)
4. Locking support
5. M4×8 Double sems screw
6. Cable clamp
7. Installation manual
8. Arm
12ips 14ips
TBD TBD
3-4
EO10-33024