Table of Contents
Advertisement
Replacing the Batteries
Batteries have a fixed lifespan and will need to be replaced occasionally to
ensure the thermostat operates correctly.
The thermostat will inform you when the batteries need to be replaced by
displaying the battery icon on screen.
Note: You must replace the batteries within 1 minute of removal in order to retain
the current clock and comfort level settings.
9
Wireless Series
Battery Icon
(Flashes)
Pairing With the RC1-W Receiver
If using with the UH1-W wiring centre, turn to page 11.
With the thermostat turned OFF:
•
Press & hold the Clock button until you see two sets of numbers appear ...
•
The small number 01 in the top right corner of the LCD is the feature number.
•
Press Clock repeatedly until you see feature 06 (Receiver Type) ......................
The options within feature 06 are: 00 = UH1-W or 01 = RC1-W receiver.
•
Use the Up/Down keys to set feature 06 to 01 (RC1-W) .............................
•
Press Clock again until you see feature 07 (Receiver Address) .........................
•
You can now select a Receiver Address from 01-32.
•
Use the Up/Down keys to set feature 07 to 01 ...............................................
(You must set a unique receiver address for each receiver installed).
•
Press Clock again until you see feature 08 (Zone number) ................................
•
You are able to connect two PRT-W thermostats to one RC1-W receiver.
•
Use the Up/Down keys to select the zone this thermostat
controls (01 or 02) ....................................................................................................
•
Press A to confirm settings and the display will go blank ..................................
Model: PRT-W
10
Advertisement
Table of Contents
