Welcome
Thank you for purchasing ZeroWire!
ZeroWire can be set up in 4 steps and the voice guide will walk you through each
of the menus and settings.
1
Install your
ZeroWire
Instead of using the keys on the front of ZeroWire, you can also set up the
system with the built-in web server interface using a browser (see "ZeroWire
Web Server" on page 20).
Please read through this guide before starting the installation.
Features and benefits
•
255 Users – enough for even moderate sized businesses
•
64 Sensors + 25 Keyfobs – provides a large coverage area
•
8 Partitions – split your system into smaller parts you can protect individually
•
Dynamic Key Lighting – lights up the available options to make it easier to
program
•
Personal Voice Guide – steps you through customizing your system
•
2 Inputs – integrate non-wireless devices to your security system
•
2 Programmable Outputs – connect other devices such as siren and strobe
•
Loud internal piezo siren – warns intruders they have been detected and
encourages them to leave quickly
•
Modern self contained unit – all in one box
•
Battery backup – your property is still protected if there is a loss of power
•
802.11 b/g WiFi – enables remote access via a web browser or smart phone
•
IEEE 802.3 Compliant Ethernet – use hardwired cable instead of wireless, the
choice is yours
•
3G Cellular radio support – allows reporting alarm messages without a fixed
line telephone service
ZeroWire Installation Manual
2
Add your
sensors
3
Add users
& keyfobs
4
Customize
your
system
1