Backlight Level
Example: Set run mode brightness level to 8
1.
2.
3.
MENU
4.
Idle mode is when your ZeroWire is not being used. The lights on the screen dim for your
comfort at night. All security functions work normally. Pressing any button will bring the
LEDs back up for normal operation.
Example: Set idle mode brightness level to 1. (A default setting is zero so normally no
lights are on after the keypad light timer expires.)
1.
2.
3.
MENU
4.
Change Time and Date
Time and date are normally automatically updated with an internet time server.
Example: Setting the time as 9.30AM, and the date as 19.6.2014
1.
YOUR 4 OR 6 DIGIT INSTALLER CODE
2.
3.
4.
5.
6.
30
7.
8.
19
14
MENU
2
1
8
MENU
MENU
2
2
1
MENU
MENU
8
ENTER
1
1
9
ENTER
ENTER
1
ENTER
Select main menu – Option 2, Backlight level.
[1] Run mode backlight level
[2] Idle mode backlight level
Set brightness level to 8.
Exit from the menu.
Select main menu – Option 2, Backlight level.
[1] Run mode backlight level.
[2] Idle mode backlight level
Set brightness level to 1.
Exit from the menu.
Select main menu - Option 8, Basic system
configuration.
Enter your Installer code.
Select time and date configuration.
[1] To configure the time and date.
[2] To configure the date.
Enter the hours value.
Enter the minutes value.
Press 1 for AM.
Press 2 for PM.
Enter the day.
ZeroWire Installation Manual