Adjust Partition Entry Or Exit Times; Configure Sensor Names - Interlogix ZeroWire Installation Manual

9.
2 0
10.
MENU
11.

Adjust Partition Entry or Exit Times

Example: Setting the entry time as 90 seconds
1.
YOUR 4 OR 6 DIGIT MASTER CODE
2.
3.
4. 9
MENU
5.

Configure Sensor Names

All sensors can be named using library words on page 50. This makes it easier to identify
the correct sensor in the event of a condition. You may enter up to eight words to achieve
your desired description.
Example: Configure sensor 1 name as "Dining Room Sensor"
1.
YOUR 4 OR 6 DIGIT INSTALLER CODE
2.
3.
4.
5
5.
1
1
MENU
6.
If you do not require all eight words, just press MENU as in step 6 after you have entered
the last word number.
ZeroWire Installation Manual
6 ENTER
1 4 ENTER
MENU MENU
MENU 8
ENTER
2
0 ENTER
MENU MENU
MENU 8
ENTER
4
1 ENTER
3 ENTER
1 7 ENTER
2 1 ENTER
MENU MENU
Enter the month.
Enter the year, it must be 4 digits.
Exit from the menu.
Select main menu - Option 8, Basic system
configuration.
Enter your Installer code.
[2] Select partition entry time.
[3] Select partition exit time.
Enter the new entry/exit time.
Exit from the menu.
Select main menu - Option 8, Basic system
configuration.
Enter your Installer code.
Select sensor name recording.
Select sensor 1.
Select word "Dining" from the word library.
Select word "Room" from the word library.
Select word "Sensor" from the word library.
Exit from the menu.
15