LB Owner’s Manual BILLY GOAT LB VACUUM Owner's Manual LB351, LB61 Optional Accessories HOSE KIT HOSE BAG SUPPORT STANDARD OPTIONAL CONNECTOR FELT DEBRIS TURF DEBRIS BAGS BAGS 4"(102mm) x To connect two Extends bag life For use in For use in 7' (3.05m)
LB Owner’s Manual CONTENTS SPECIFICATIONS AND SOUND/ VIBRATION INSTRUCTION LABELS PACKING CHECKLIST & ASSEMBLY OPERATION MAINTENANCE AND TROUBLESHOOTING ILLUSTRATED PARTS & PARTS LISTS Part No 901014 Form No F072111C...
INSTRUCTION LABELS ® The labels shown below were installed on your BILLY GOAT LB Vacuum. If any labels are damaged or missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown.
LB Owner’s Manual PACKING CHECKLIST Your Billy Goat LB Vacuum is shipped from the factory in one carton, completely assembled except for the upper handle, debris bag. READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box the Handle Assembly is attached by...
LB Owner’s Manual OPERATION VACUUMING OPERATION VACUUM NOZZLE HEIGHT ADJUSTMENT : is raised and lowered by adjusting front wheel height control. FOR MAXIMUM PICKUP : Adjust nozzle close to debris, but without blocking airflow into the nozzle. NOTE: Never bury nozzle into debris. CLEARING A CLOGGED NOZZLE &...
LB Owner’s Manual MAINTENANCE ERIODIC AINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Use (daily) Every 5 hrs (daily) Inspect for loose, worn or damaged parts. Clean Debris bag Check bag strap tightness Engine (See Engine Manual) Check for excessive vibration IMPELLER REMOVAL 1.
Need help?
Do you have a question about the LB351 and is the answer not in the manual?
Questions and answers