Billy Goat LB61 Owner's Manual

Billy Goat LB61 Owner's Manual

Lb vacuum
Hide thumbs Also See for LB61:

Advertisement

Optional Accessories

HOSE KIT
4"(102mm) x
7' (3.05m)
For
vacuuming in
hard to reach
.
areas
P/N 900460
Part No 901009
LB Owner's Manual
BILLY GOAT LB VACUUM
Owner's Manual
HOSE
CONNECTOR
KIT
To connect two
lengths of 4"
hose (hose not
included).
P/N 890045
LB61
BAG SUPPORT
STANDARD
KIT
FELT DEBRIS
Extends bag life
For use in
by keeping bag
dusty
from dragging
conditions.
ground.
P/N 900645
P/N 900719
1
OPTIONAL
TURF DEBRIS
BAGS
BAGS
For use in
leaves and
grass in non-
dusty
conditions.
P/N 900722
Form No F040908A

Advertisement

Table of Contents
loading

Summary of Contents for Billy Goat LB61

  • Page 1: Optional Accessories

    LB Owner’s Manual BILLY GOAT LB VACUUM Owner's Manual LB61 Optional Accessories HOSE KIT HOSE BAG SUPPORT STANDARD OPTIONAL CONNECTOR FELT DEBRIS TURF DEBRIS BAGS BAGS 4"(102mm) x To connect two Extends bag life For use in For use in 7' (3.05m)
  • Page 2: Table Of Contents

    LB Owner’s Manual ABOUT THIS MANUAL ® THANK YOU for purchasing a BILLY GOAT LB Vacuum. Your new machine has been carefully designed and manufactured to provide years of reliable and productive service. This manual provides complete operating and maintenance instructions that will help to maintain your machine in top running order. Read this manual carefully before assembling, operating, or servicing your equipment.
  • Page 3: Serial Plate Data And Specifications

    LB Owner’s Manual SERIAL PLATE DATA Record the model number, serial number, date of purchase, and where purchased. Purchase Date: Purchased From: Specifications LB61 Engine: HP 6.0 (4.47 kW) Engine: Type B & S QUANTUM Engine: Model 112K020124E1 Engine: Fuel Capacity 1.5 qt.
  • Page 4: General Safety

    This symbol indicates that this manual and the engine manufacturer’s manual should be read carefully before assembling, operation, or servicing this equipment. ® This symbol indicates important information that will prevent damage to your BILLY GOAT LB Vacuum. This symbol indicates the engine oil level should be checked before operating this equipment.
  • Page 5 LB Owner’s Manual DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling. DO NOT store gasoline near an open flame.
  • Page 6: Sound And Vibration

    LB Owner’s Manual SOUND SOUND LEVEL 85 dB(a) at Operator Ear 105 dB Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 12-12-2002 under the conditions listed below. Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model.
  • Page 7: Instruction Labels

    INSTRUCTION LABELS ® The labels shown below were installed on your BILLY GOAT LB Vacuum. If any labels are damaged or missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown.
  • Page 8: Packing Checklist & Assembly

    LB Owner’s Manual PACKING CHECKLIST Your Billy Goat LB Vacuum is shipped from the factory in one carton, completely assembled except for the upper handle, debris bag. READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box the Handle Assembly is attached by...
  • Page 9: Operation

    LB Owner’s Manual OPERATION Like all mechanical tools, reasonable care must be used when operating machine. Inspect machine work area and machine before operating. Make sure that all operators of this equipment are trained in general machine use and safety. PUT OIL IN ENGINE BEFORE STARTING STARTING ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used.
  • Page 10 LB Owner’s Manual OPERATION VACUUMING OPERATION VACUUM NOZZLE HEIGHT ADJUSTMENT : is raised and lowered by adjusting front wheel height control. FOR MAXIMUM PICKUP : Adjust nozzle close to debris, but without blocking airflow into the nozzle. NOTE: Never bury nozzle into debris. CLEARING A CLOGGED NOZZLE &...
  • Page 11: Maintenance

    LB Owner’s Manual MAINTENANCE ERIODIC AINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Use (daily) Every 5 hrs (daily) Inspect for loose, worn or damaged parts. Clean Debris bag Check bag strap tightness Engine (See Engine Manual) Check for excessive vibration IMPELLER REMOVAL 1.
  • Page 12: Troubleshooting And Warranty Procedure

    Warranty Claim. • The distributor service manager will sign off on the claim and submit it to BILLY GOAT for consideration. • The Technical Service Department at BILLY GOAT will study the claim and may request parts to be returned for examination.
  • Page 13: Maintenance Record

    LB Owner’s Manual MAINTENANCE RECORD Date Service Performed Part No 901009 Form No F040908A...
  • Page 14: Illustrated Parts & Parts Lists

    LB Owner’s Manual PARTS DRAWING LB Part No 901009 Form No F040908A...
  • Page 15: Parts List

    LB Owner’s Manual PARTS LIST IT E M K D 612 D E S C R IP TIO N Q T Y N O . P art N o . H O U S IN G A S S Y 900590-04 W R A P P E R -IN T A K E A S S Y 900607-04...
  • Page 16 LB Owner’s Manual BRUSH CUTTER FORCE BLOWER AERATOR If you liked this product please feel free to view our full line of quality lawn care, renovation, and debris removal products at www.billygoat.com QL VACUUM MULTI VACUUM POWER RAKE Part No 901009 Form No F040908A...

Table of Contents