Summary of Contents for Focal Point BLENHEIM LCD INSET ELECTRIC FIRE
Page 1
Focal Point Fires plc. You are not per- mitted to copy or adapt any of the content without the prior written permission of Focal Point Fires plc.
100mm or greater and neither spacer is used. It may be installed directly into any propri- etary surround which can house this size of rebate, without the need to recess the appliance into a wall opening or fabricate a false chimney breast. 2014 Focal Point Fires plc.
Cast frame models : Remove the decorative frame from it’s protective packaging.The frame is retained onto the firebox with a mount- ing bracket at the top of the frame and three magnets on each leg of the frame. 2014 Focal Point Fires plc.
(OI) to the “off ” position. It is also recommended to unplug the power supply cable at the supply outlet when not in use. Figure 11 2014 Focal Point Fires plc.
- Blue EARTH - Green/Yellow Refer to Section 2.0,Appliance Data for fuse specification. Excluding fuses, use only genuine manufacturers spare parts available from your sup- plier. 12.0 APPLIANCE DIMENSIONS All dimensions in mm. Fig. 12 2014 Focal Point Fires plc.
Page 6
3G Service Department to the address below. Alternatively, you can email or fax.Please note that this does not affect your statutory rights. Focal Point Fires plc, 3G Service Department, Reid Street, Christchurch, Dorset, BH23 2BT. Alternatively email: 3g@focalpointfires.co.uk or fax. 01202 499326.
Need help?
Do you have a question about the BLENHEIM LCD INSET ELECTRIC FIRE and is the answer not in the manual?
Questions and answers
wiring diagrame for the electrical fire
The wiring for the Focal Point Blenheim LCD Inset Electric Fire follows this color code:
- LIVE wire: Brown
- NEUTRAL wire: Blue
- EARTH wire: Green/Yellow
Refer to Section 2.0, Appliance Data, for the fuse specification. Only genuine manufacturer’s spare parts should be used, excluding fuses.
This answer is automatically generated