Panasonic AW-HE130W Operating Instructions Manual page 45

Basic operations (continued)
The following operations can be performed from the AK-HRP200 Remote Operation Panel.
For details on operations, refer to the AK-HRP200 Operating Instructions <Basics>.
Control/display component
1 Camera power switch
2 VF power switch
3 Color bar signal output switch
4 Auto white balance switch
5 Auto black balance switch
6 Auto setup switch
7 5600 k switch
8 Matrix switch
9 Skin color detail switch
10 Knee OFF switch
11 Detail OFF switch
Shutter ON/OFF switch,
12
STEP/SYNC switch
13 Scene / user file selection switch
14 Scene / user file 1 switch
15 Scene / user file 2 switch
16 Scene / user file 3 switch
17 Scene file 4 switch
18 Scene / user file storage switch
19 Volume lock switch
20 R gain volume
21 B gain volume
22 R flare / pedestal volume
23 B flare / pedestal volume
24 DTL volume
25 Data set (up)
26 Data set (down)
27 Adjustment value display
28 IRIS display
29 ND/CC display selection switch
30 ND display
31 CC display
M.GAIN / M.PED display
32
Selection switch
33 M.GAIN display
34 M.PED display
SHUTTER display selection
35
Switch
36 SHUTTER display
37 SYNC display
38 Camera number display
39 Camera number tens display
40 Camera selection switch
41 Menu / character switch
Label
HEAD POWER
VF POWER
BARS/TEST
AUTO WHITE
AUTO BLACK
AUTO SETUP
5600k
MATRIX
SKIN DTL ON
KNEE OFF
DTL OFF
SHUTTER ON STEP/SYNC
SCENE/USER FILE SHIFT
SCENE/USER FILE1
SCENE/USER FILE2
SCENE/USER FILE3
SCENE FILE 4
SCENE/USER FILE STORE
VOL LOCK
GAIN R
GAIN B
FLARE/PED
FLARE/PED
DTL
DATA SET UP
DATA SET DOWN
None
IRIS
DISPLAY SELECT
ND/CC
ND
CC
DISPLAY SELECT
M.GAIN/M.PED
M.GAIN
M.PED
DISPLAY SELECT
SHUTTER
SHT
SYNC
CAM No.
10-19
CAM SEL
CHARA
MENU ON/OFF
HE130
Supported
―
Supported with some
Does not transition to TEST_ON.
restrictions
Running state after accepting AWB/ABB
Supported
lasts at least 2 sec.
Running state after accepting AWB/ABB
Supported
lasts at least 2 sec.
―
―
―
―
―
Supported
Supported with some The shutter value is fixed during transition
restrictions from SYNC (see No. 36).
―
Supported
Supported
Supported
Supported
―
Supported
Supported
Supported
PED: Supported
FLR: ―
PED: Supported
FLR: ―
―
Supported
Supported
Supported
Supported with some Operation is supported, but the IRIS
restrictions value cannot be displayed.
Used for ZOOM / FOCUS MODE
switching.
Supported with some
restrictions
Used for ND / ZOOM / FOCUS MODE
switching.
Supported
―
Supported
Supported
Supported
Supported
The shutter value is fixed during transition
from SYNC.
• For 59.94p, 59.94i: 1/100
Supported with some
• For 29.97p: 1/120
restrictions
• For 23.98p: 1/120
• For 50p, 50i: 1/120
• For 25p: 1/120
Supported with some The display for 7SEG will be "----" during
restrictions SYNC.
Supported
Supported
Supported
Supported
Remarks
45