Image Screen - Panasonic AW-HE130W Operating Instructions Manual

Web screen configurations (continued)

Image screen

IP video settings tab (Video over IP)
„
The JPEG image and H.264 image settings as well as the settings
related to image quality are selected on this screen.
z Initial display settings for "Live" page
Set initial display settings for the Live screen.
Stream
Select the type of images to display in the Live screen.
Setting value:
Display videos (H.264(1)).
H.264(1)
Display videos (H.264(2)).
H.264(2)
Display videos (H.264(3)).
H.264(3)
Display videos (H.264(4)).
H.264(4)
JPEG(1) Display still images (JPEG(1))
JPEG(2) Display still images (JPEG(2))
JPEG(3) Display still images (JPEG(3))
Factory settings: H264(1)
Refresh interval (JPEG)
Select the frame rate for JPEG images.
Setting value:
For 60Hz:
1fps/2fps/3fps/5fps/6fps /10fps
1
*
For 50Hz:
1fps/2fps/5fps/10fps /12.5fps
1
*
Factory settings: 5fps
*
1
When [H.264 transmission] is set to [On], the frame rate may be
slower than the specified value in some cases.
<NOTE>
• The frame rate may be slower depending on the network
environment, resolution, image quality, access volume, etc.
• If images are not transmitted at the specified frame rate, lowering
the resolution or image quality may result in transmissions closer to
the specified value.
Image quality (JPEG)
When displaying JPEG images in the Live screen, set the quality of
the first image that appears to Quality1 or Quality2.
Setting value:
Quality1 Image quality 1
Quality2 Image quality 2
Factory settings: Quality1
z JPEG
Set the resolution and quality settings for [JPEG(1)], [JPEG(2)], and
[JPEG(3)]. For details on settings for H.264 images, see page @@.
Image capture size
Select the resolution of the images to be displayed when displaying
JPEG images.
Setting value:
JPEG(1):
1920x1080/1280x720/640x360/320x180/160x90
JPEG(2):
1280x720/640x360/320x180/160x90
JPEG(3):
640x360/320x180/160x90
Factory settings:
JPEG(1): 1920×1080
JPEG(2): 640×360
JPEG(3): 320×180
Image quality
Specify the JPEG image quality (2 types) for each resolution.
Setting value:
0 Super fine / 1 Fine / 2 / 3 / 4 / 5 Normal / 6 / 7 / 8 / 9 Low
Factory settings:
Image quality 1: 5 Normal
Image quality 2: 8
z H.264(1) • H.264(2) • H.264(3) • H.264(4)
Specify the [Max bit rate (per client)], [Image capture size], [Image
quality], and other settings for H.264 images.
For details on setting the JPEG images, refer to page @@.
H.264 transmission
Whether to transmit the H.264 images is set here using On or Off.
Setting value:
On H.264 images are transmitted.
Off H.264 images are not transmitted.
Factory settings: On
<NOTE>
• When "On" has been selected as the [H.264 transmission] setting,
both H.264 images and JPEG images can be displayed on the live
screen.
• When "On" has been selected as the [H.264 transmission] setting,
the image refresh interval may become slower.
/15fps /30fps
1 1 1
* * *
/25fps
1 1
* *
73