Panasonic AW-HE130W Operating Instructions Manual page 85

Web screen configurations (continued)
Frequency
This item is selected to switch the frame frequency.
Setting value:
59.94Hz / 50Hz
• When the frequency is switched, "Format" is set as follows.
59.94Hz
1080/59.94p
1080/29.97p
1080/23.98p
1080/59.94i
1080/29.97PsF
1080/23.98PsF
720/59.94p
480/59.94p(i)
Color Bars Setup
This is only enabled when "Frequency" is set to "59.94Hz".
Select the color bar setup level (Off: 0.0IRE, On: 7.5IRE) for the
VIDEO OUT signal.
Setting value:
Off 0.0IRE
On 7.5IRE
z Other
This item's setting is reflected when the Set button is pressed.
Install Position
"Desktop" or "Hanging" is selected here as the method used to install
the unit.
Setting value:
Desktop Stand-alone installation
Hanging Suspended installation
• When "Hanging" has been selected, the top, bottom, left and right
of the images will be reversed, and up/down/left/right control for
panning and tilting will also be reversed.
Smart Picture Flip
When this is set to [Auto] and the tilt becomes the angle set for
[Flip DetectAngle], the image will be flipped in the vertical direction
automatically.
Setting value:
Off Does not flip the image vertically.
Auto When the tilt becomes the angle set for [Flip DetectAngle], the
image will be flipped in the vertical direction automatically.
Flip Detect Angle
Set the tilt angle at which the image will be flipped in the vertical
direction automatically when [Smart Picture Flip] is set to [Auto].
Setting range: 60° to 120°
Preset Speed Table
Set the preset speed table (Slow, Fast).
During preset playback, presets are performed at [Preset Speed] (1 to
30) values that are based on the table set here.
Setting value:
Slow Set the preset speed table to slow.
Fast Set the preset speed table to fast.
Preset Speed
Set the pan/tilt movement speed used when recalling camera
orientation information registered to the preset memory (30 steps).
Setting range: 1 to 30
• When you set large Preset Speed values, the image may sway
when the movement stops.
• When [Preset Speed Table] is set to [Fast], [Preset Speed] values
equivalent to the AW-HE120 will be applied.
50Hz
1080/50p

1080/25p

1080/25p

1080/50i

1080/25PsF

1080/25PsF

720/50p

576/50p(i)

Preset Scope
Selected here are the setting items to be recalled when the contents
of the preset memory are regenerated.
Setting value:
Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain,
Mode A
white balance adjustment value
Mode B Pan, Tilt, Zoom (including digital zoom), Focus, Iris
Mode C Pan, Tilt, Zoom (including digital zoom), Focus
Freeze During Preset
Turn the function for freezing images during preset playback off/on.
When this is set to [On], preset playback is performed with a still
of the image immediately preceding the start of preset playback
being output. The image freeze is released when preset playback is
finished.
Setting value:
Off Do not freezing images during preset playback.
On Freeze images during preset playback.
Speed With Zoom POS.
"Off" or "On" is set here for the function used to adjust the pan-tilt
adjustment speed in conjunction with the zoom magnification.
When "On" is set, the panning and tilting operations will become
slower in the zoom status.
This function has no effect during preset operations.
Setting value:
Off Do not adjust the panning and tilting speed in the zoom status.
The panning and tilting operations will become slower in the
On
zoom status.
Focus Mode
Select auto or manual mode for the focus adjustment function.
Setting value:
Auto Always adjust focus automatically.
Manual Adjust focus manually.
Focus ADJ With PTZ.
"Off" or "On" is set here for the function which compensates for out-of-
focusing when it occurs during panning, tilting or zooming operations.
When "Off" is set, adjust the focus as required after zooming or set
the focus to the auto mode.
This item can be selected only when "Manual" has been selected as
the "Focus Mode" setting.
Setting value:
Off Out-of-focusing is not compensated.
On Out-of-focusing is compensated.
Digital Zoom
"Enable" or "Disable" is set here for the digital zoom function.
If zooming is performed toward the Tele end beyond the maximum
position when "Enable" has been selected, the digital zoom can be
operated continuously. Zooming will stop temporarily at the position
where the optical zoom and digital zoom are switched so after it has
stopped at this position, proceed with zooming again.
When the setting is changed to "Disable" while already in the digital
zoom region, the zoom will automatically move to the maximum
position of the optical zoom.
Setting value:
Disable Disable the digital zoom function.
Enable Enable the digital zoom function.
The digital zoom is set to off when color bars are displayed during
digital zooming.
Max Digital Zoom
Set the maximum digital zoom magnification.
Setting value:
x2 / x3 / x4 / x5 / x6 / x7 / x8 / x9 / x10
85