Panasonic AW-HE130W Operating Instructions Manual page 78

Web screen configurations (continued)
Shutter Mode
Select for camera shutter speed.
When a higher shutter speed is selected, fast-moving subjects do not
become blurred easily but the images will be darker.
Setting value:
Off The shutter is set to OFF.
Step The step shutter is set (the steps can be changed).
Synchro The synchro shutter is set (the setting can be changed
continuously).
ELC The electronic shutter is controlled and the light quantity
is adjusted automatically.
The shutter speeds that can be set are listed below.
When 59.94 Hz has been set as the unit's frequency
When "Step" is
selected as the
"Shutter Mode"
For 59.94p/ 1/100, 1/120, 1/250,
59.94i 1/500, 1/1000, 1/2000,
1/4000, 1/10000
For 29.97p 1/30, 1/60, 1/120, 1/250,
1/500, 1/1000, 1/2000,
1/4000, 1/10000
For 23.98p 1/24, 1/60, 1/120, 1/250,
1/500, 1/1000, 1 /2000,
1/4000, 1/10000
When 50 Hz has been set as the unit's frequency
When "Step" is
selected as the
"Shutter Mode"
For 50p/ 50i 1/60, 1/120, 1/250,
1/500, 1/1000, 1/2000,
1/4000, 1/10000
For 25p 1/25, 1/60, 1/120, 1/250,
1/500, 1/1000, 1/2000,
1/4000, 1/10000
For 23.98p 1/24, 1/60, 1/120, 1/250,
1/500, 1/1000, 1 /2000,
1/4000, 1/10000
Gain
The image gain is adjusted here.
In locations which are too dark, adjust the gain upward; conversely, in
locations which are too bright, adjust it downward.
Setting range: Auto, 0dB to 36dB
When "Auto" is set, the light quantity is adjusted automatically.
The noise increases when the gain is increased.
AGC Max Gain
When "Auto" is selected as the "Gain" setting, the maximum gain-up
amount can be set.
Setting value:
6dB Set the maximum gain increase to 6 dB.
12dB Set the maximum gain increase to 12 dB.
18dB Set the maximum gain increase to 18 dB.
78
When "Synchro"
is selected as the
"Shutter Mode"
60.15Hz to 642.21Hz
(255 steps)
When "Synchro"
is selected as the
"Shutter Mode"
50.15Hz to 535.71Hz
(255 steps)
Frame Mix
Select for frame addition (gain-up using sensor storage) amount.
When frame addition is performed, it will appear as if the images are
missing some frames.
Setting value:
OFF Frame addition is not performed.
6dB Set the frame addition amount to 6 dB.
12dB Set the frame addition amount to 12 dB.
18dB Set the frame addition amount to 18 dB.
24dB Set the frame addition amount to 24 dB.
• This cannot be configured when the format is 1080/29.97p,
1080/23.98p, 1080/29.97PsF, 1080/23.98PsF, 1080/25p, or
1080/25PsF.
• The auto exposure correction and auto focus functions will be
disabled when [Frame Mix] is set to [18dB] or [24dB]. (Only manual
operation will be possible.)
<NOTE>
• Under discharge tube illumination, such as fluorescent and mercury-
vapor lights, the brightness may change synchronously, colors may
change, and horizontal stripes may flow up and down the image.
In such cases, we recommend setting the electronic shutter speed
to 1/100 in regions with 50 Hz power supply frequency, and to OFF
in regions with 60 Hz power supply frequency.
ND Filter
Set the transmittance of the lens' built-in ND (neutral density) filter.
Setting value:
Through Do not set ND filter.
1/8 Set ND filter transmittance to 1/8.
1/64 Set ND filter transmittance to 1/64.
Day/Night
Switch between standard shooting and night-vision shooting (shooting
with infrared light).
Setting value:
Day Standard shooting (day mode)
Night Night-vision shooting (night mode)